Breaking

Post Top Ad

Your Ad Spot

Saturday 1 December 2018

Air Conditioner Efficiency | EER - Energy Efficiency Ratio | SEER - Seasonal Energy Efficiency Ratio


Air conditioners are rated by the number of British Thermal Units (BTU) of heat they can remove per hour. Another common rating term for air conditioning size is the "ton," which is 12,000 BTU per hour.
Equipment used in cooling systems in residential and small commercial buildings often express the cooling system efficiency in terms like
EER - Energy Efficiency Ratio and/or
SEER - Seasonal Energy Efficiency Ratio.

For air conditioners in rooms it is common to use EER - Energy Efficiency Ratio.
For central air conditioner systems it is more common to use SEER - Seasonal Energy Efficiency Ratio.

EER - Energy Efficiency Ratio :-
EER is a measure of how efficient a cooling system operates in steady state (over time) when the outdoor temperature is at a specific level (outdoor conditions commonly used are
95°F (35°C)).The higher EER - the more energy efficient is the system.

The EER can be calculated using this equation :-


Remember that the EER energy-efficiency rating lists how many BTUs per hour are removed or “pulled out” for each watt of power it draws. Room air conditioners generally range from 5,500 BTU per hour to 14,000 BTU per hour (1.5 kW - 4.5 kW).
  • 1 Btu/h = 2.931x10-4 kW = 0.0299 kpm/s = 0.252 kcal/h = 3.986x10-4 hk = 3.939x10-4 hp = 0.2163 ft lb/s.

National appliance standards require room air conditioners built after January 1, 1990, to have an EER of 8.0 or greater. A room air conditioner with an EER of at least 9.0 is recommended for milder climates, whereas in hotter climates an EER over 10 is preferred.
SEER - Seasonal Energy Efficiency Ratio :-

Seasonal Energy Efficiency Ratio (SEER) measures how efficiently a central air conditioner will operate at a specific outdoor temperature. The higher the SEER, the more efficient the system.
The SEER can be calculated using this equation:

Again, the SEER energy-efficiency rating lists how many BTUs per hour are removed or “pulled out” for each watt of power it draws.
National minimum standards for central air conditioners require a SEER of 9.7 and 10.0, for single-package and split-systems, respectively. But you do not need to settle for the minimum standard—there is a wide selection of units with SEERs reaching nearly 17.
Before 1979, the SEERs of central air conditioners ranged from 4.5 to 8.0. Replacing a 1970s-era central air conditioner with a SEER of 6 with a new unit having a SEER of 12 will cut your air conditioning costs in half. Today's best air conditioners use 30% to 50% less energy to produce the same amount of cooling as air conditioners made in the mid 1970s. Even if your air conditioner is only 10 years old, you may save 20 to 40 percent of your cooling energy costs by replacing it with a newer, more efficient model.

3 comments:

  1. What a fantabulous post this has been. Never seen this kind of useful post. I am grateful to you and expect more number of posts like these. Thank you very much. Air Conditioner

    ReplyDelete
  2. Great article with excellent idea!Thank you for such a valuable article. I really appreciate for this great information.. aircon servicing

    ReplyDelete
  3. It was a very good post indeed. I thoroughly enjoyed reading it in my lunch time. Will surely come and visit this blog more often. Thanks for sharing. Top 10 inverter AC

    ReplyDelete

Post Top Ad

Your Ad Spot

Pages